Ready-Faced Magnesium Oxide Board
A magnesium oxysulfate board with a factory-applied non-woven surface for wall sheathing, fire-rated ductwork and SIP panel production.
Select this series when the project needs a consistent faced surface and a board specification matched to the wall or prefabricated assembly.
MOQ: 1 × 20GP container
Primary Fit
The non-woven finish distinguishes this series from sanded structural floor boards and decorative laminated panels.
01
For exterior or interior framed wall assemblies where the board and system specification are confirmed for the project.
02
For duct enclosure and fire-rated assembly projects subject to the required system design and test scope.
03
For structural insulated panel production requiring a consistent faced MgO skin and controlled board dimensions.
Reference Specification
The final specification depends on the assembly, performance requirement and destination market. The following range is for early product matching.
Thickness: 6–15 mm
Standard sizes: 1220×2440, 1220×2740, 1220×3048 mm
Surface: Non-woven finish
Reference density: 1000–1100 kg/m³
Minimum order: 1×20GP container
Product Selection
This board is selected by its factory-applied facing and end use. It is not the same product as a sanded structural floor board or an HPL/melamine-faced decorative wall panel.
Sulfycor uses a magnesium oxysulfate cement system formed from reactive magnesium oxide, magnesium sulfate and water. Share the intended assembly so the facing, thickness and supporting documentation can be reviewed together.
Product List
Review the available products in this series, then confirm the project specification before ordering.
Quality Evidence
Sulfycor non-woven magnesium oxysulfate boards are supported by current Sulfycor-applicant fire reports and historical wall-assembly testing.
Available evidence includes European A1 classification, ASTM surface-burning and non-combustibility testing, AS 1530.1 testing and a project-specific two-hour load-bearing wall assembly.
Wall fire resistance depends on the complete tested assembly—not the board alone.
European ClassificationEN 13501-1 Class A1Sulfycor-applicant reaction-to-fire classification for magnesium sulfate board.
Surface BurningFSI 0 · SDI 0Approximately 12 mm board evaluated under ASTM E84.
Non-CombustibilityNo Smoke or Flame ObservedFour 12 mm specimens met the report criteria in ASTM E136 testing.
Assembly Testing2-Hour Load-Bearing WallHistorical ASTM E119 evidence for a specific steel-stud wall assembly.
Results apply to the tested board samples and wall construction. Thickness, framing, fasteners, joints and complete assembly must match the relevant report scope.
Request a Project Match
Send the application, thickness, size, quantity, destination and required standard. We will prepare the relevant board recommendation and quotation.
Wall sheathing · Ductwork · SIP panels
MOQ: 1 × 20GP container
GET A QUOTE NOW
